katyavorozhko的部落格

bsp thread size chart pdf

Rating: 4.5 / 5 (1975 votes)

Downloads: 43107
 

= = = = = CLICK HERE TO DOWNLOAD = = = = =
 

GHT (3/4")ODM, Malone Specialty Inc. Malone Specialty IncEast Ave., Mentor, Ohio Phone~ Faxsales@ Pipe thread sizes – BSP Threads. ODMOutside Diameter of the Male IDFInside Diameter of the Female TPIThreads per Inch. The size number was originally based on the inner diameter NPT/NPS vs BSP Pitch NOMINAL THREAD SIZE (inch) PITCH NPT/NPS BSP 1//////4 /// Adapter Sizing Chart. Basic depth of thread (h) (in.) JIC, SAE O-ring & Flat Face threads measure as listed below Malone Specialty IncEast Ave., Mentor, Ohio Phone~ Faxsales@ BRITISH STANDARD PIPE THREADS (BSPP, BSPF) Dash Size Nominal Thread Sizet.p.i. This chart does not constitute actual advice and Pipe Warehouse UK is not responsible for any issues arising from the use or reliance on the information contained in this document. BSPT & BSPP Threads Dimensions. All information provided in this document is intended as a preliminary guide only. BSP threads are used commonly in many countries outside the U.S. There are two types of BSP threads: BSPT (British Standard Pipe Taper)See the tables below for BSPP British Standard Pipe BSP thread chart, BSP thread chart showing TPI and drill sizes BSP THREAD STANDARD. “Gas”, “R” & “G” also refer to BSP British Standard Pipe Taper (BSPT) Threads Size Chart Thick‐ ness [mm] 1/////// Thread Designation Nominal Size Thread Form Type Major Diameter mm d=D Pitch mm p Threads per inch Pitch Diameter mm d2=D2 Minor Diameter Male Thd. d3 Thread Height H1 Tap Drill Diameter mm G1//8" BSPPG1//4" BSPP BSP THREAD STANDARD. For example, a 1/4” NPTF, BSPT or BSPP will actually measure 1/2” on the O. D. of the threads. BSPT is divided intosub-groups: BSPT R – External Tapered (Can be assembled with both Rc & Rp internal threads) BSPT Rc – Internal Tapered (To be used with BSPT R) See the tables below for BSPP and BSPT pipe sizes and the corresponding threads per inch. A list ofthread sizes are defined by the standards, ranging from 1/16” to 6”. NPTF, BSPT and BSPP measure 1/4” larger than their actual size. For example, a 1/4” NPTF, BSPT or BSPP will actually measure 1/2” on the O. D. of the Therefore all our below charts are in millimeters. Subtract approx/4″ (6mm) from thread diameter measurement for nominal pipe size. Parallel pipe size Thread size Threads per inch G 1/8“ 3/8“G 1/4“ 1/2“G 3/8“ 5/8“G 1/2“ 3/4“G 3/4“ 1“G 1“/8“G/4“/8“G/2“/8“G 2“/8“G/2“/8“G 3“ 3 British Standard Pipe BSP thread chart, BSP thread chart showing TPI and drill sizes. MALE TAPERED THREAD SIZE (inch) DN (mm) ACTUAL OD (mm) WALL (mm) 1/ 3 For low working pressure. MALE TAPERED THREAD SIZE (inch) CORRESPONDING PIPE. All copyrights and intellectual properties are retained by Technical Information. Adapter Sizing Chart. This chart does not constitute actual advice and Pipe BRITISH STANDARD PIPE DIMENSIONS FOR UNIFIED THREAD SIZES MALE TAPERED THREAD SIZE (inch) CORRESPONDING PIPE 1////// British Standard pipe thread: parallel, BSPP/BPSF 1/8"/4"size dash size outer Nominal Dimensions of Standard Threads. NPTF, BSPT and BSPP measure 1/4” larger than their actual size. Thread size refers to the nominal bore of the pipe. You can view the Inch translation of all the dimensions in the BSP Thread Calculator. BSPP BSPT B RITISH S TANDARD P IPE P ARALLEL B RITISH S TANDARD P IPE T APER BRITISH STANDARD PIPE DIMENSIONS FOR UNIFIED THREAD SIZES. Pitch is Threads Per Inch (TPI). All information provided in this document is intended as a preliminary guide only.